- Time
- Post link
not sure how to pm, but i would like the covers you did. amazing work
not sure how to pm, but i would like the covers you did. amazing work
i cant figure out how to pm him, but i would like copies of those custom 7 blu ray covers that are above. or how to pm him. thanks
Id like ep 1 - 7 and the special features please
i cant figure out how to pm him, but i would like copies of those custom 7 blu ray covers that are above. or how to pm him. thanks
Click on the desired persons user name and then click on “start private topic”.
Pain is temporary, film is forever!
- John Milius
I used HP double sided brochure paper for the sleeves. I used an epson metallic photo paper for the slipcase and poster folders. When making the slip case I use a roll of 3M dry mount the print onto a thin poster board and double sided carpet tape to close the case. I also use a 3M gloss laminate sheet over the top before doing the folding indentations. The disks were a aqua seal gloss disk. Hope that helps.
Could you please be more specific about the bluray discs you used? I’ve tried to find what you are talking about but have come up empty. Thanks a lot.
I used HP double sided brochure paper for the sleeves. I used an epson metallic photo paper for the slipcase and poster folders. When making the slip case I use a roll of 3M dry mount the print onto a thin poster board and double sided carpet tape to close the case. I also use a 3M gloss laminate sheet over the top before doing the folding indentations. The disks were a aqua seal gloss disk. Hope that helps.
Here you go
https://www.amazon.com/PlexDisc-Liquid-Defense-Printable-Spindle/dp/B00J5UT17Y
Could you please be more specific about the bluray discs you used? I’ve tried to find what you are talking about but have come up empty. Thanks a lot.
I used HP double sided brochure paper for the sleeves. I used an epson metallic photo paper for the slipcase and poster folders. When making the slip case I use a roll of 3M dry mount the print onto a thin poster board and double sided carpet tape to close the case. I also use a 3M gloss laminate sheet over the top before doing the folding indentations. The disks were a aqua seal gloss disk. Hope that helps.
Yeah, same. Not sure if he’s active anymore.
Hey There,
Heres an update of my custom set. Finally got the positioning right to fit the covers perfectly in the 15mm Criterion Blu-ray boxes and was able to track down some higher resolution art for the back. As for the inside/reverse, I printed them with the Noriyoshi Ohrai collage style prints. All in all, pretty happy with the results. Hope you enjoy.
Any chance I could get a PM of these? They’re EXACTLY what I’ve been looking for!
I sent ‘samlowry’ a message about those amazing covers a while back now, and got no reply. I hope he’s OK.
Do they not see the birds controlled in the atmosphere of the sky? none holds them up except Allah. Indeed in that are signs for a people who believe. – Quran (16:79)
Hey Everyone
I’ve created a new blu-ray cover for the A New Hope Bluray to replace the collective box set.
Right now I’ve just got the ANH cover but plan to make covers for the other 5 (probs not TFA)
Wondering for suggestions on improvements.
NOTE: This is a combination of the works of nei1b (http://nei1b.deviantart.com/art/Star-Wars-Saga-Fan-Made-Blu-Ray-DVD-Box-Covers-352111675) and sirota554 (http://originaltrilogy.com/post/id/959267) as well as some other really minor stuff I added.
This is meant to be a combination of two great existing covers that I thought I might share and I have no intentions of taking credit for all of this.
Please let me know what you all think.
Hey Guys got some updated versions of the ANH Blu-Ray Cover
I’ve done some more touchups on stuff and changed some of the back cover information
Please let me know of any possible improvements
Note: These continue using the existing works of nei1b (http://nei1b.deviantart.com/art/Star-Wars-Saga-Fan-Made-Blu-Ray-DVD-Box-Covers-352111675), sirota554 (http://originaltrilogy.com/post/id/959267) and phildesfr (https://s14.postimg.io/i1dxqk3ht/DISPLAY_cases.jpg).
Since there are already a bunch of covers out there you can only do so many before you’re copying someone else so Im trying to combine the best of whats available. These are meant to look like legitimate individual replacements to the combined blu ray box set. Let me know your thoughts
Yet another Star Wars set of mine. Obviously based on the VHSs from the early 2000’s. These are available by PM. Please specify “The Black Series” if you message me for them. I’ve done so many sets I can’t know which you’re asking for otherwise. If you don’t say which covers you’re after I won’t reply.
Visit my *NEW* Star Wars on Video Collection site:
Here you go
https://www.amazon.com/PlexDisc-Liquid-Defense-Printable-Spindle/dp/B00J5UT17Y
Could you please be more specific about the bluray discs you used? I’ve tried to find what you are talking about but have come up empty. Thanks a lot.
I used HP double sided brochure paper for the sleeves. I used an epson metallic photo paper for the slipcase and poster folders. When making the slip case I use a roll of 3M dry mount the print onto a thin poster board and double sided carpet tape to close the case. I also use a 3M gloss laminate sheet over the top before doing the folding indentations. The disks were a aqua seal gloss disk. Hope that helps.
THank you very much
Yeah, I just bought some from Amazon Uk and they are really nice…
Here are all the Star Wars The Force Awakens Blu-ray covers I’ve made so far. Some of these were made as part of full saga collections, but I thought it might be nice to see them all together.
All are available by PM request. Please specify which one you’d like.
On this first one I switched out Daisy Ridley’s portrait with one from artist Paul Shipper, as I felt the likeness from original artist Blake Armstrong wasn’t up to snuff. This was a relatively easy swap as they both traced the same photo, so Shipper’s Rey fit perfectly over Armstrong’s. I also changed “Young Han”, where Armstrong had used a still from Star Wars '77 as reference. Ford’s nose has grown considerably longer since 1976, so I superimposed the eyes, nose and mouth from the official Force Awakens theatrical poster over Armstrong’s art.
Visit my *NEW* Star Wars on Video Collection site:
Finally got around to doing the prequels in my set, any technical critiques would be appreciated also tweaked the OT and TFA slightly. Let me know your thoughts.
Here is a Force Awakens update to my “White set” of Star Wars covers:
PM me for downloads.
Can someone PM me the original Harmy Blu-ray cases that he made? I can’t find them anywhere in good enough resolution to print. I don’t need the pics to be ridiculously huge, just big enough to print.
Do they not see the birds controlled in the atmosphere of the sky? none holds them up except Allah. Indeed in that are signs for a people who believe. – Quran (16:79)
Can someone PM me the original Harmy Blu-ray cases that he made? I can’t find them anywhere in good enough resolution to print. I don’t need the pics to be ridiculously huge, just big enough to print.
pm
Hey everyone, this is my first time here and I’m blown away by the level of creativity people here have! I recently got my hands on Harmy’s Despecialized Editions and printed out covers for them on DVD using the 1995 “Faces” covers but I was wondering if anyone could do a box set template for DVD of the box set those videos came in.
Here’s a reference: http://media-cache-ak0.pinimg.com/736x/b0/e8/89/b0e889b32d487e336e8775e4a11e273a.jpg
Can anyone help?
Hi,
Could anyone redo the back covers in English?
Thanks,
Sherman
Hi everyone! There are some AMAZING artists here - I can only hope to someday master the skills you folks have.
I have what may be a somewhat odd request, and I hope it doesn’t come across as too demanding. I would like to package Episodes I-VI together into one Blu-Ray case to save shelf space, and I was wondering if anyone has made a Blu-Ray design that would fit - or could be modified for - the following insert dimensions:
Height: 5.750"
Back/Front Panels: 5.125" wide
Edge Panel: 0.906" wide
Total Size: 11.156" x 5.75"
The case that fits that insert will hold six discs, and can be found on Amazon here: https://www.amazon.com/gp/product/B00361ZJQU
Any assistance would be GREATLY appreciated.
Well, nevermind! I found some elements uploaded by phildesfr in a separate thread (and did some work with Google Images), so I had a bit of fun with a VERY simple layout.
Here’s where I got the base elements: http://originaltrilogy.com/topic/Custom-blu-ray-setfor-the-Despecialized-Editions/id/18201
THANKS ALL for the inspiration!
Hi, I’m new here and have just downloaded the 2.7 DE. I was wondering if you could help me out with a group of cases from a few years back. They are by michaeldc and the link to the case files in dropbox have a 403 error. I really like these cases. I appreciate your help. Thank you.
I’m not sure how to add a photo but here’s a link.
http://www.sftrecords.co.uk/SW-Cases.png
Anyone have a link to these?
Fan made SilverScreen Edition Artwork posted on TheStarWarsTrilogy.com’s facebook page - I don’t know about you but I like it!
That… that is BEAUTIFUL.
Working on a set for the Despecialized Blu-ray set I’m putting together. I’m trying to go simple. I’ve used quite a few posts in here for inspiration! Thank you all for the great work, and for sharing it with everyone. When I’m done of course I’ll make the high-res versions for anyone who might care.