How to Calibrate your T.V.(Please read the first post) — Page 9

But, I don't want to.

Don't be silly. I only do that when I need to adjust the black level.

The Dark Knight Blu-ray is the best movie to calibrated your T.V.

Use this scene for brightness(black level), to where you can see Bat Mans eye holes/nose. Plus you need to see the traction of the tire(dark dark dark gray/gold,gold cus of the light).

 Use this scene for contrast, just to where you can see every black boards for the light tiles. Plus use this scene for color(saturation), to where the skin tones look normal.  

 Or this scene for the color(saturation),just to make the colored lights look natural. To where the top of the blue building is a dark blue, and the mid-top of the building is a vivid blue. Plus the red and the green of this scene needs to be a vivid red and green.                                                 And this scene is good for brightness too, just make the blacks as dark as possible and to where you can just see the differences between 90%-95% of the buildings side/top edges.  

 The Tint(Hue) should be 50% green and 50% red. Remember that color tone should be at the warmest setting, and color temperature should be at the lowest setting lowest setting(may look a little red or yellow at first, but that's normal if you been watching on a cool or high setting). Sharpness should be 40%- 25%. DNR should be low,off,or auto. Gamma(if you have it) should be 2%-2.5%(2.2 is the normal standards for T.V.s), or full-range. Have no overscaning, set edge enhanment to off.            

Bingowings said:

I don't have a blu-ray player, I'm certainly not getting one if they have idents scribbled over the picture.

There's a setting called 'Indent Level' that will allow you to adjust how intrusive they are, or even turn them off....if you want to do that for some crazy reason.

It doesn't matter where we do it......as long as we're together.

*audience collectively says 'awwwwwww' *

Now, take your pants off. We won't be needing them tonight.

*audience laughs, applauds, and hoots wildly*

It might have the 'Automatic Indent Removal Technology' system built-in. If so, you'll have to mod your TV to bypass the 'AIRT' chip located inside the screen.

those screen shots of batman are ok,

but maybe some other titles that people have..

maybe something star wars related... hint hint..

(despite some of the overall color issues)..

still it's an interesting sample.

later

-1

TV's Frink said:

That sounds difficult.

Actually, it's not. All you gotta do is drill a tiny hole in a random spot on the screen, and then use a straightened paperclip to push the bypass button inside.

TV's Frink said:

It didn't work. :-(

  hahahahahaha, you screw your T.V. and now it don't work,hahahahahahahahaha 

TV's Frink said:

My tv doesn't say "Blu-ray.com" so it must need calibration, right?

    That's just the website I got the pictures off of.

bad troll, is Bad. Or seven years old.

@bkev

I'm not a troll.

@darth_ender

Yes, Frink did shoot first, and I shoot back 

pat man said:

@bkev

I'm not a troll.

....

So, you're seven years old?

Davnes007 said:

pat man said:

@bkev

I'm not a troll.

....

So, you're seven years old?

  16

pat man said:

Davnes007 said:

pat man said:

@bkev

I'm not a troll.

....

So, you're seven years old?

  16

Awwwww....Sweet 16. ;)