The first two DO correspond to side changes referenced to the DC set. However, are those frames also absent from the Faces set? My guess would be no, as I used audio from the Faces to fill in the missing bits between the sides of the DC. So I’m guessing if the audio was there, the missing frames would be too.

For the record, I had to remove a total of 3527 samples at four different points from the PCM track to sample-synch accurately with the GOUT. If I’m not mistaken, this works out to roughly two frames.

Also for the record, only example two (at the transition from side 4 to side 5 in the DC set) corresponds to any of the original reel changeovers (and none on any of the CLV issues). Since the available lengths per side of either a CAV or CLD disc are both greater than that of a typical film reel, the splits in a typical Laserdisc are generally determined irrespective of the reel changeover intervals (unless by happy coincidence one happens to fall in the same place), and usually have more do with loading the disc sides to capacity.