Printing out DVD Labels

Author: Cable-X1
Date: 23-Jul-2005, 11:22 AM

Author: Cable-X1
Time: 23-Jul-2005 11:22 AM
Post link

Hey There everyone!!!

I see all the great DVD cover art on here and I was wondering something.

I don't have a color laser printer (which obviously gives the better looking results when you print these out), but I would love to print these labels out for my own OOT set.
I'm not exactly the richest person and a color laser printer seems to run at about $500.

Is there an alternative? Is there a place I can go to have this stuff printed at super high quality and just pay a modest fee? Is there an online service that does it and mails it to you?

Author: Karyudo
Time: 23-Jul-2005 11:26 AM
Post link

I'm pretty sure FedEx Kinko's will do it. Make sure the cover art goes on legal, and you're set.

You might also find someone here might be able to hook you up. I've got an 11x17 colour laser printer at work, but sadly I don't have the printer drivers set up to run it. Damn IT department!

Author: dark_jedi
Time: 23-Jul-2005 11:29 AM
Post link

you dont have to have a laser printer,i use a inkjet printer,the Epson Stylus Photo R200,it also does dvd printing also,just make sure you get white inkjet hub printable dvdr's,and the progaram i use to print the covers with is UnderCoverXP it will do standard cases and slimline.The software for printing the dvdr's comes with the printer,you can get these printers for about $80.00 to $100.00 depending on where you go.
hope this helps
DJ

Author: bwlag
Time: 23-Jul-2005 1:02 PM
Post link

I also use the Epson R200, and the results are pretty good, certainly for the $80 price I paid. It includes a tray specifically for printing on printable DVDs and CDs, and I've been pleased with what I get from it.

Author: weapon
Time: 23-Jul-2005 3:17 PM
Post link

I use canon printer for my cd/dvds.

They are really cheap right now since canon is about to debut the next generation.

Canon disabled cdr printing in the north american versions but some brilliant people on another website figured out the eprom setting and now it works. The hard part is getting the original canon cdr tray (I am working on getting some for next week). You can also make your own tray or convert an epson tray. The ink is cheap compared to epson and the ink tanks do not have any chip tech so using refillable ink systems are a snap.

Here is the website: 5 easy steps to get your canon to print dvds

I got my ip5000 FAR. Canon has a promotion for $70 rebate if you purchased a computer, digital camera or Dv camcorder recently.

Here is a link to those promotions: Canon printer promotions

Check out fatwallet for the best deals.

But if you just want straight out of the box dvd printing I would also recommend the epson r200.

Here is a good comparison of 8 popular inkjets: Inkjet review linky

If you need any more help, just ask.

Author: wertyqa
Time: 23-Jul-2005 6:16 PM
Post link

Canon disabled cdr printing in the north american versions

I´m considering to by Canon ip4000 or Epson R200 - do you know if european printers (Canon) have been disabled, cdr wise that is?
Canon does have cheaper inks, but Epson does more dips (does it really matter...?).

Also what kind of paper is best for insert/cover printing. High gloss photo paper (200 or more) is out of the guestion cause it will crack when bent - right? Matte, Gloss, Semi gloss, ...?!

Author: eDroj
Time: 23-Jul-2005 8:11 PM
Post link

Originally posted by: wertyqa

Canon disabled cdr printing in the north american versions

The european versions of the Canon Pixma series are not limited in any way... I have the Canon IP4000 and it works like a charm, both printing on high gloss paper and printing on printable media such as CDR/DVDR.

Do, or do not. There is no try.

Author: oojason
Time: 23-Jul-2005 8:34 PM
Post link

I lucked in last year when I got an R300 for £85 from Boots - never knew they even did printers until I saw an advert for it. Has printed off some quality covers and discart over the past few months

A little patience goes a long way on this old-school Rebel base. If you are having issues finding what you are looking for, these will be of some help…

Welcome to the OriginalTrilogy.com | Introduce yourself in here | Useful info within : About : Help : Site Rules : Fan Project Rules : Announcements
‘How do I do this?’ on the OriginalTrilogy.com; some info & answers + FAQs - includes info on how to search for projects and threads on the OT•com

A Project Index for Star Wars Preservations (Harmy’s Despecialized & 4K77/80/83 etc) : A Project Index for Star Wars Fan Edits (adywan & Hal 9000 etc)

… and take your time to look around this site before posting - to get a feel for this place. Don’t just lazily make yet another thread asking for projects.

Author: weapon
Time: 23-Jul-2005 9:05 PM
Post link

The canon european versions have cdr printing capabilities fully enabled.

But so do the americas versions with a 5 minute change to the eprom. Just press a few buttons and boom you are ready to print. The only draw back is the cd tray and the flip up door with alignment rollers that are included with the euro versions.

I am working on a pipeline for the trays. I hope to have 30 or so tray available in the next couple of weeks.

The door is a whole other problem all together. I have tried to get some but they are on back order from canon. 16 weeks lead time.

Due to all the hoops that we americans have to jump through to get the parts, overseas shipping and such the trays run $30 and the door another $20- 30 on ebay.

Author: mingus2112
Time: 24-Jul-2005 4:49 AM
Post link

Anyone know of a cheap CD ONLY alternative? I have an HP photo printer that i absolutely love right now. I used Epsons forever and loved them too, but this new HP beat it out on greyscale photos (i have a lot of old photos). Only thing it doesn't do is cd/dvd printing. Go figure. I don't mind buying an R200, but a whole new printer for just DVD printing seems like a waste of desk space. Any ideas?

Author: SKot
Time: 24-Jul-2005 1:04 PM
Post link

Let me put in my 2 cents for the Epson R200...

I bought one just recently (it was the direct-to-disc printing that sold me - I've always hated stick-on labels, and the alternative of writing on the disc looks like crap!), and so far I LOVE it. It prints stunning CD and DVD covers when set on the highest quality setting, and the disc printing option is a godsend. Finally I can make my DVDs and CDs look professional and shelf-worthy!

So I give a whole-hearted recommendation for the R200. I paid 99 bucks for mine, and unless mine breaks down in 6 months (which is always possible, I admit), I'm 100% sold on this model. I predict that direct-to-disc printing will take over the market very quickly, one way or another.

--SKot

Projects:
Return Of The Ewok and Other Short Films (with OCPmovie) [COMPLETED]
Preserving the…cringe…Star Wars Holiday Special [COMPLETED]
The Star Wars TV Commercials Project [DORMANT]
Felix the Cat 1919-1930 early film shorts preservation [ONGOING]
Lights Out! (lost TV anthology shows) [ONGOING]
Iznogoud (1995 animated series) English audio preservation [ONGOING]

Author: MoveAlong
Time: 24-Jul-2005 2:32 PM
Post link

I've had my R200 for over a year now and have printed literally hundreds of discs and covers with it. It is awesome! Works great with generic ink, too. To get the disc colors to pop, I seal the discs with Krylon #1305 gloss acrylic spray.

You can go about your business. Move along, move along.

The Story of Star Wars
The Adventures Of Luke Skywalker

Author: mingus2112
Time: 24-Jul-2005 3:37 PM
Post link

Originally posted by: MoveAlong
I've had my R200 for over a year now and have printed literally hundreds of discs and covers with it. It is awesome! Works great with generic ink, too. To get the disc colors to pop, I seal the discs with Krylon #1305 gloss acrylic spray.

you just spray it on? i'd be worried about that in my dvd player. it works ok though? anybody else "seal" their discs?

-James

Author: MoveAlong
Time: 24-Jul-2005 6:15 PM
Post link

Originally posted by: mingus2112

you just spray it on? i'd be worried about that in my dvd player. it works ok though? anybody else "seal" their discs?

-James

I know, it sounds wierd but it works great. I found the idea somewhere online. Printable media has a matte surface. Colors tend to not "pop" enough with just the printed matte disc. With a thin coating of gloss acrylic, colors are much more vibrant. Plus the printed disc surface is now waterproof and UV protected (I don't plan on keeping my discs under water in the sun, but it's comforting nonetheless). This definitely makes the disc look more "professional", and isn't that what most of us are after with these preservation projects?

Here are my steps for anyone interested:

Obvious disclaimer: these methods work well for me. ymmv. practice makes perfect.

1) In a well ventilated area (like outside sheltered from any wind), using a piece of cardboard as a base, place one to two discs (maximum) on a section of non glossy newspaper.

2) Using Krylon #1305 or #1303, spray the disc(s) evenly holding the can 10-12 inches away with an even side to side motion. This will take some practice to perfect. It's arts and crafts time at this point. The goal is to get enough coverage but not so much that the spray "pools" around the edge of the disc. The non glossy newspaper will absorb some of the spray, but it's easy to go overboard and put too much on.

3) Using the cardboard base to move the discs, gently slide the newspaper and discs off the cardboard to a drying area. Let dry 24 hours. Once the acrylic coating has cured, you'll have a thin, rock hard glossy surface to your disc. If you have a hard time getting the discs off the newspaper, you used too much spray and it worked its way under the disc. If you do it right your printed surface will be sealed and the recordable side will be untouched.

I have never had any problem in any dvd player with this method, and I have shipped literally hundreds of dvd's all over the world that were made like this. I prefer Ridata G05 hub to hub full surface printable media, FWIW.

Hope this helps...

You can go about your business. Move along, move along.

The Story of Star Wars
The Adventures Of Luke Skywalker

Author: Observer
Time: 24-Jul-2005 9:44 PM
Post link

Here's the only problem I see with all of this: many DVD players specifically state in the handbooks that you shouldn't put ANYTHING on the surface of a DVD/CD. This is mostly talking about stick-on labels, but also includes printing and sharpie's. The reason for this is because it can disturb the spin of the disc while it is being played. This leads to the DVD/CD being scratched and/or the player being damaged. The ink from a printer and shaprie can also melt from the heat within some players and cause damage. Just a word of caution...

Author: Erikstormtrooper
Time: 25-Jul-2005 1:37 AM
Post link

Originally posted by: Observer
Here's the only problem I see with all of this: many DVD players specifically state in the handbooks that you shouldn't put ANYTHING on the surface of a DVD/CD. This is mostly talking about stick-on labels, but also includes printing and sharpie's. The reason for this is because it can disturb the spin of the disc while it is being played. This leads to the DVD/CD being scratched and/or the player being damaged. The ink from a printer and shaprie can also melt from the heat within some players and cause damage. Just a word of caution...

Oh, come on! Now I can't even use a sharpie on my DVDs and CDs? That's rediculous. I think this is the industry trying to get us to stop burning our own discs. I understand how a printed label could be a problem, but a SHARPIE?

You know of the rebellion against the Empire?

Author: MoveAlong
Time: 25-Jul-2005 9:39 PM
Post link

Well if that's true, Hollywood better stop screen printing their discs! Seriously though, I find it extremely unlikely that dried sharpie ink could actually melt (or cured ink for that matter). I think if the disc got this hot, your AV system would be on fire and it would be the least of your problems. There's caution and then there's propaganda. This seems like the latter. I can go along with the problems from peel and stick labels and heat, but that's about it...

You can go about your business. Move along, move along.

The Story of Star Wars
The Adventures Of Luke Skywalker

Author: Observer
Time: 25-Jul-2005 11:55 PM
Post link

Don't shoot the messenger! Seriously though, you're probably right about Shapies. However, I know a few people who used plain markers or pens and after running them through their CD player the ink melted all over the disc. So if anything, make sure you're using the right writing tool...

Author: Darth Simon
Time: 26-Jul-2005 1:07 AM
Post link

We bought this printer (well actually the Epson R300) for my mom last christmas so she can print out pictures from her digital camera, and I have to say this thing is great. The CD/DVD printing actually is used more by my brothers and I, but its still great. Ive considered getting my own, since i live out of state and cant use it as often as id like (i also feel kinda bad about using all my mom's ink

).

You can get the R300 which has a few other features, for like $97 online (search pricewatch.com) The other nice thing about these printers (and epsons in general as compared to HP's which is what i currently have and used to use) is the seperate ink cartridges for each color. plus even getting a set of all the colors is still cheaper than one HP cartridge

as far the sharpies and writing on the cds, ive heard of the paper labels messing up the spin and/or peeling off, but didnt hear the ink thing or the sharpie thing. I did hear some 'crap' about the sharpie bleeding through the disc over time which makes absolutly no sense, but whatever...i think thats just to scare people so they buy more expensive 'CD Writing Pens' which are basically just sharpies made by the cds companies

Also, the ink seems to be applied fairly evenly so i doubt it will interfer with the spin/balance and does ink melt? Either way, if I had my way, id buy one of those nice color laser printers that can print on discs

-Darth Simon

Why Anakin really turned to the dark side:
"Anakin, You're father I am" - Yoda
"No. No. That's not true! That's impossible!" - Anakin

0100111001101001011011100110101001100001

*touchy people disclaimer*
some or all of the above comments are partially exaggerated to convey a point, none of the comments are meant as personal attacks on anyone mentioned or reference in the above post

Author: MeBeJedi
Time: 27-Jul-2005 9:25 PM
Post link

I love my R300, and use hub-printable CDs and DVDs. It prints great, and fairly quickly. I have to thank Rikter for his recommendation. Next month, I hope to get a continuous ink system, because those individual ink cartridges just don't hold a whole lotta ink.

MeBeJedi: Sadly, I believe the prequels are beyond repair.
JediRandy: They’re certainly beyond any repair you’re capable of making.

MeBeJedi: You aren’t one of us.
Go-Mer-Tonic: I can’t say I find that very disappointing.

JediRandy: I won’t suck as much as a fan edit.

Author: oojason
Time: 27-Jul-2005 9:41 PM
Post link

^ "I hope to get a continuous ink system" - a bit like Tartan paint?

Seriously, there is another option other than the 6 individual slot catridges? Any links m8?

A little patience goes a long way on this old-school Rebel base. If you are having issues finding what you are looking for, these will be of some help…

A Project Index for Star Wars Preservations (Harmy’s Despecialized & 4K77/80/83 etc) : A Project Index for Star Wars Fan Edits (adywan & Hal 9000 etc)

… and take your time to look around this site before posting - to get a feel for this place. Don’t just lazily make yet another thread asking for projects.

Author: MeBeJedi
Time: 27-Jul-2005 10:03 PM
Post link

EDIT: Turned it into a link

MeBeJedi: Sadly, I believe the prequels are beyond repair.
JediRandy: They’re certainly beyond any repair you’re capable of making.

MeBeJedi: You aren’t one of us.
Go-Mer-Tonic: I can’t say I find that very disappointing.

JediRandy: I won’t suck as much as a fan edit.

Author: Rikter
Time: 27-Jul-2005 10:29 PM
Post link

The R200 and R300 are the best and lowest cost printers out there!! I think the Canon is hot also but they're more $$$ then the R200

I bought my R200 as a Factory Refurbished unit for $70 shipped on eBay and I just now found this guy selling Refurbished R300 for $88 !! shipped - I've bought a few refurbished things on eBay now and they've all worked fine

and the ink can be CHEAP also but be picky on where you get the ink - this is some good ink that I found "CHEAP" but I've used it in my HP880c I've also found it at my local Sam's (membership required - WEAK) and I do plan on getting some refillable carts for my R200 (no need for CIS as I don't print that often)

OH - and Dark Jedi turned me on to these carts for $41.69 for TWO sets of ink!!!!

“My skill are no longer as Mad as the once were” RiK

Author: MeBeJedi
Time: 27-Jul-2005 11:16 PM
Post link

Damn! How can they sell them that cheap!?!

Hey Rik, did your brother ever try his CIS yet?

MeBeJedi: Sadly, I believe the prequels are beyond repair.
JediRandy: They’re certainly beyond any repair you’re capable of making.

MeBeJedi: You aren’t one of us.
Go-Mer-Tonic: I can’t say I find that very disappointing.

JediRandy: I won’t suck as much as a fan edit.

Author: dark_jedi
Time: 27-Jul-2005 11:59 PM
Post link

those arent epson made they are generic but they work,i am using them now,they are made by G&G,pretty cheap for all carts.
DJ