"the output file from VirtualDubMod is a projected 250GB and I only have a 150GB drive ! Is there a way to modulate the size of the outputted file without compromising quality (too much ?). Probably a pipe dream, I know - but thought I'd ask"

I'm away from my main computer, but look under the Video menu (I think), and then Compression (someone please correct me.) You will see a list of codecs, and I'm betting that the first setting - Uncompressed/RGB - is selected. The codec of choice on these boards is called HuffyUV, and it'll get your filesize down well below 100GBs.

AOTC doesn't need the AVISynth work. It's all already 16:9 progressive.

I'll leave this question to somebody more qualified like MeBeJedi, who hopefully is listening.

In Womble, export your audio as a WAV file. Then load your new audio and new video into a new, temporary womble project. See how many frames off the result is.

Then, go to Vegas and load in the WAV file created above as a reference file. Hold down the control key while pushing/pulling the end of the WAV file the number of frames noted above. This will time compress/expand the WAV file. Then sync all your clips to this reference file. Be sure to mute the reference file before you export.

Works like a charm for me every time. If you have long clips to sync, it is best to sync them in the middle of the clip rather than the beginning or the end, as they may get "off" a little because of the time difference. This keeps them from getting off a noticible amount. If you have a REALLY long clip to sync, you may want to splice it in a few places and crossfade a frame or so, just to force it to stay in sync.

"I'll leave this question to somebody more qualified like MeBeJedi, who hopefully is listening."

I just got back home last night.

"One way around this is to convert this MPEG to avi...but if i do this, even with HuffyUV compression (or no compression at all) will it affect how the file looks?

Essentially---is it better to use the MPG file and not AVI?"

Really depends on what you want to do with the video. If you are just cutting or rearranging scenes from the DVD, then I would recommend Womble (which would make you ADM's problem, rather than mine, since I have no experience with this program. ). This has the added benefit of keeping the original MPEG source undisturbed.

If you are adding/removing visual information, or making difficult splices with audio or video overlaps, then you are probably better off making an AVI of it. One thing that will likely happen is the reds will change slightly, so if you are fussy about the colors, you should do some color correction.

Vegas will import VOBs and MPEGs, but you need the MainConconcept MPG-2 plug-in. Also, native MPEG editing can be very slow, depending on the size of the video file. If you have the room, you are better off importing the MPEG, rendering out an AVI, and then importing the AVI for your editing work. Then you can render out the final product to a new MPEG. The drawback to all this is that the original MPEG is already compressed, and you are recompressing that visual data when you make the new MPEG. As such, you will probably notice many color differences between the master MPEG and your new MPEG. Experiment until you get the look that you want.

Yes. This is why we use it for the X0 Project.

[EDIT]

BTW, when you use it, go to the Huffy settings and make sure it is set for YUV, rather than RGB (The box on the right). This will insure the smallest filesize.

I have created a surround file the way you described it with Vegas.
I then imported this soundfile into Womble and edited the video and cut the audio to fit the video.

I then exported the movie (m2v file), and checked if it still was surround sound. According to my computer, it was AC3 5.1 surround.

Then to double-check it, I let DVD Lab Pro split the audio from the m2v file, I split the 6 audiochannels again into 6 mono channels, but now suddenly every channel is the same. Each channel has suddenly the voice from the center track in it.

Do you know if I did something wrong or what is going on?

Go back to your original Vegas project and be sure that your channels are mapped properly. By default, each track is mapped to all five speakers. Turn off all but the correct one on each track and re-export. If you re-export it to the same file name as before, you shouldn't have to re-do all those edits in Womble.

Hope that solves it for you.

Hmn, I thought I had the configuration right about my surround sound, but it seems it was not right. I have muted all channels but one, and I can still hear it in every speaker.
Here's a screenshot of my configuration:
screenshot

I rendered as a surround sound.

Can you tell me what I have done wrong?


EDIT Oct. 8th:
I noticed I only heard the center channel, the other channels didn't play. I tested my surround sound on my computer, and it works.

In Vegas, with each channel I had clicked on the speaker that it should be. But because of this, somehow I couldn't hear it.

I have dragged each orange figure to each speaker, and then I can hear it.

But after with rendering, I play the AC3 with Media Player Classic, and I hear the same things in each speaker, which is not the case when I preview the file (before saving) in Vegas.

I really don't know what to do...

Hello ADM,

First of all kudos to your excellent work on your edits !!! Thumbs up to your guide too.

I attempt to repair/add missing Dubbed soundtracks to some of my DVDs, as some of them were never released with them to begin with, or were released with out-of-synch tracks.
French being my original language, I intend to restore the original French Tracks to Superman the Movie, and The Towering Inferno.
To get some practice, I started with one DVD that needs an audio track to be re-synched.

Following your guide, I got no problem setting up Womble MPEG Video Wizard Dvd and DVD Decrypter.
I'm now done with the editing of my missing track. On top of re-synched, it needed some parts of the other track to be completed.

Here is my question :
On page 1 you advised ReverendBeastly to edit his track and then remux it to the original video file.
I tried several things for hours in Womble but I'm still stuck. At best I was able to get a Video File with 1 Audio Track.
Could you elborate for a noob on specifically how to remux 2 audio tracks to the original video file in Womble, and then burn it back onto a DVD ?

EDIT : Alternatively, it is my understanding that I could just remux the modified track back to the ripped content of the DVD. Here again how exactly do you do that in Womble ?

Thanks a gazillion and keep up the excellent work !!!

Templar, if you are synching multiple tracks with the intent of having them as multiple streams, I recommend muting track1, exporting everything, then unmuting track 1, mute track 2, export everything again to new file names, then throw away the duplicate video file. You should have two tracks synched to the same video.

I hope that helps. It sounds like it might address your issue.

Maurice, you have the mute/unmutes in reverse. Blue=on, grey=muted. Switch them around and you should be good to go. Sorry to take so long to respond. I've been offline for several days.

I will give it a try, but I'm not sure if it's gonna turn out okay.

In the mean time, I have saved all streams as a mono wav file and compiled an AC3 audio with an other program. I will try it tonight with Vegas.

Works like a charm, thank you very much. The only problem is the volume is somehow changed....??

Changed how? Can you up another screen shot?

I fixed most of the volume now, there's only 1 "problem".
You know in Terminator 3, when the Terminator goes shopping, there's a song "Dat Funky Man" playing out loud? When I play the compiled movie, the song is almost gone, very muted down somehow. I only hear it when the Terminator steps outside, but that's because the song's volume is cranked up in that part.

Could it be the case because when compiling the AC3 sound, it does something 27db (lowering the volume with 27 db or something like that, it's the default configuration of the surround sound in Vegas).

Is the song only present in one of the channels? If it's mixed in (as I'd expect) then it should be at the same level as all other ambient noise in the channel.

Beyond that, I have no idea.